24/7 Emergency Repairs

For immediate assistance

call: 0161 210 5153

30mm Lath - N30 Window Shutters

Applications

Building perimeter security roller shutter for window protection, access or storage applications with electric operation.

Specific applications include window protection, shop fronts, shopping malls, factory units, industrial buildings, stadiums, general storage rooms, equipment and plant rooms, schools, hospitals, garages and homes.

Maximum Size

4,000 mm wide x 3,000 mm high

Product Features

  • Curtain - Constructed using 30mm extruded aluminium flat faced box section interlocking laths.
    The laths are retained in position using nylon end locks and spacers fitted with aluminium rivets. Each lath has its own neoprene weather seal to prevent ingress of water.
    Refer 'Aluminium Lath' drawing for details.
  • Bottom Rail - One piece extruded 80mm wide aluminium section. A Bottom Seal can be provided as an optional extra. Refer 'Aluminium Bottom Rail' drawings for details.
  • Side Guides and Angles - Side Guides are fabricated from galvanised steel channel roll formed in house and complete with splayed tops. Side Guides size depends on width of the opening and options include 50 x 32 x 2.5 mm and 65 x 32 x 2.5 mm. Extruded aluminium Side Guides 38 x 29 x 3mm are also available as an option. Where required or specified the Side Guides are bolted to fixing angles or posts of size and thickness to suit the shutter and application. Refer 'Architectural Steel Side Guide' drawing details for options.
  • Roller Drum - Fabricated from mild or galvanised steel tube of appropriate outside diameter and thickness engineered to suit the size and application of the roller shutter. Tube Motor complete with adaptor sized to fit tube is fitted at one end with fabricated steel 'Lost Bobbin' at the other. Mild steel tube is prime painted.
  • Bracket Plates - Fabricated from 3mm galvanised steel in sizes to suit the height of the opening and engineered tube size. Generally the Brackets are fixed to the supporting angles. The Bracket Plates are provided with fixing lugs where hoods or fascia panels are required or specified.
  • Operation - Tube Motor selection is based on torque required to lift the Curtain during its operating cycle. Motors are 240V and can be activated through a variety of control devices to suit application or customer preference. Refer 'Electrical Control Options' page. Tube motors require single phase 13Amp 3 pin plug socket within 1 metre of each door opening.
  • Door Locking - Is not recommended for electrically operated roller shutters.
  • Finishes - Aluminium components are supplied in mill finish as standard. Etch and Clear Anodising or Powder Coating in standard available colours is a n optional extra. Powder Coating is performed in house. All galvanised items are supplied in raw finish when not powder coated.
  • Hoods / Fascias - Available as optional extras to suit the application. Hoods are manufactured in house from 20 swg (0.9 mm) galvanised steel sheet.
  • Weight - 10 kg/m2

Technical Information

Technical drawings of this product are listed below in PDF format. You will need the free Adobe Reader® software to view these files. Get Adobe Reader

Also see Tube Motor Options

Ordering Information

To order ths product, please download and complete the following order form:

To find out about our fast lead times, pricing and any other details contact our dedicated Sales Consultants on 0161 210 5153.